Table of Contents
Advertisement
Cont' Thermostat Programming:
The mode the thermostat is in when the PROGRAM or RUN button is pressed is the mode that will be controlled by
that program. If in the COOL mode as shown, the program entered will be stored as the program for cooling.
The mode displayed on the screen is the mode that will run.
To program the thermostat, you will use the PROGRAM, HEAT/COOL, UP, and DOWN buttons.
Step 1
Press the PROGRAM button to put the thermostat into the programming mode. The display will blink all of the day of
the week icons. Pressing the UP or DOWN buttons will toggle between (weekday) icons and the (weekend) icons.
Ensure the display is blinking the days you want to program. Press HEAT/COOL.
Step 2
Next the morning period will blink. Use the UP or DOWN button to toggle through Morning, Day, Evening, or Night,
stopping at the period you want to program. Press HEAT/COOL.
Step 3
Next, the hour of the day will blink. This is the starting hour of the period you have selected. Use the UP or DOWN
button to change the selected hour start time. Press HEAT/COOL.
Step 4
The minute of the day will blink next. This is the starting minute in the hour. Use the UP or DOWN button to change the
minute digits to the desired setting. (Note that the minutes change in five-minute increments.) Press HEAT/COOL.
Step 5
The desired set point will now be blinking. This is the temperature you want the thermostat to go to at the time of the
day you selected. Press the UP or DOWN button to change the set point temperature.
Step 6
If you started with the morning time period, the next period, Day, will now be blinking. Follow steps two, three, four and
five above for each period you wish to program
Exiting program mode:
Pressing the PROGRAM button at any time will exit out of the programming
mode, save your changes to memory and return you to normal thermostat
operation.
10
.
930-01-005 (4/8)
Advertisement
Table of Contents
