Table of Contents
Advertisement
Problem
The printer does
not print.
Paper is not fed
into the printer.
The printer ejects
blank pages .
Solving Printing Problems
If you have any problems with the operation of your ML-6100, refer to
Table 5.1 for suggested remedies.
Possible Cause
Your printer is not selected as the
default printer.
The top cover may be open.
The printer cable is not connected
properly.
The printer cable is defective.
The port setting is incorrect.
The toner cartridge is not installed
properly.
A paper jam has occurred.
The printer may be configured
incorrectly.
The printer driver may be incorrectly
installed.
Paper has not been loaded correctly.
There is too much paper in the paper
tray.
The toner cartridge is out of toner.
Table 5.1
Select Samsung 6100 Series PCL6,
Samsung 6100 Series PCL5e, or
Samsung 6100 Series PS a your
default printer. See the section
"Selecting Your Printer" (page 4.2).
Make sure that all covers are closed
securely.
Check all connections.
Swap the cable with one known to
work. If printing is now possible,
replace the bad cable.
Check the Window printer setting to
make sure that the print job is being
sent to the correct port (for example,
LPT1).
Remove and reinsert the toner
cartridge.
Clear the paper jam.
Check the application to make sure
that all print settings are correct.
Uninstall the printer driver, then
reinstall the printer driver. Try printing
a configuration sheet.
Remove the paper tray and reload
the paper correctly.
Remove some of the paper from the
tray.
Replace the toner cartridge.
Remedy
Troubleshooting
5.
9
Advertisement
Table of Contents
