Table of Contents
Advertisement
Problem
Background
scatter.
Missing character.
Back of printout
dirty.
Incorrect fonts.
Faded graphics.
Possible Cause
The paper may be too damp.
Printing over uneven surfaces.
The paper may be too damp.
The transfer roller may be dirty.
TrueType fonts may be disabled.
Toner may be low.
Remedy
Try printing with a different batch of
paper. Do not open packages of
paper until necessary so that the
paper does not aborb too much
moisture from the air.
If printing onto envelopes, change
your printing layout to avoid printing
over areas that have overlapping
seams on the reverse side.
Try printing with a different batch of
paper. Do not open packages of
paper until necessary so that the
paper does not absorb too much
moisture from the air.
Print a few blank pages to clean the
transfer roller.
Use the Fonts dialog box in the
Remote Control Panel to enable
TrueType fonts.
Remove the toner cartridge and
shake it gently to evenly distribute
the toner. Then replace the cartridge
back into the printer.
Troubleshooting
5.
13
Advertisement
Table of Contents
