Easy Clocking XENIO 5O Instruction Manual page 13

3.
Verify the following parameters:
Host PC IP Address:
of the Server or PC in which the Easy
Clocking software is installed. Refer back
to number 1.
Host PC Port:
port for Installed Software is 5011.
4.
Select
SAVE
This icon represents the connection status between
the Xenio Smart Clock and the Server. When the
device has not obtained a valid connection to the
server, the following icon will display
successful connection has been established, the
will disappear.
XXX.XX.XXX.XXX
5011
Enter the IP address
The time clock communication
to apply any changes.
X X X
X X X
. Once a
13