Connect Via Ethernet/Network Cable - Easy Clocking XENIO 5O Instruction Manual

Connect via Ethernet/Network Cable

1.
Open the Xenio Time Clock Menu
2.
Select Ethernet
3.
The Xenio has been pre-configured to use DHCP.
This will automatically assign an available IP Address
on your network
If you choose to configure the clock to use
a Static IP, you will need to change the
setting from DHCP to Static.
Once you have specified Static, you will
be able to input your Static IP Address,
Default Gateway and Subnet Mask
(pre-configured to 255.255.255.0)
4.
Select
Tap
Tap
Ethernet
IP Settings
DHCP
IP Address
XXXXXX
Default Gateway
Subnet Mask
255.255.255.0
to complete to process
SAVE
11