Advertisement
Pacific Chest
AFGSP = Glazed Spice finish
AFCAF = Caffè finish
Model #
1134AFGSPa;
1134AFCAFa
5-Drawer Pacific
Chest
1136AFGSPa;
1136AFCAFa
7-Drawer Pacific
Chest
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions before you begin your project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
• For normal household use only. Not recommended for
commercial use.
• Do not climb, sit or stand on this piece of furniture.
• Do not overload the drawers.
• Unload items before you move this unit.
• Before you load or move this unit, tighten all screws and
supports.
• Before you begin your project, completely read the
Assembly Instructions.
• Store this item: 1- in its box; 2- in a dry place; 3- in
temperatures that range from 40°F to 90°F (not on a cold
and possibly damp cement floor).
• Periodically inspect your furniture for any loose glue
joints, screws or any other problem that might affect the
stability of your furniture. Tighten or repair as needed.
Serious or fatal crushing injuries can occur from
furniture tip-over. To help prevent tip-over:
• Place heaviest items in the bottom drawers.
• Unless specifically designed to accommodate, do not
set TVs or other heavy objects on top of this product.
• Never allow children to climb or hang on drawers, doors
or shelves.
• Never open more than one drawer at a time.
Use of tip-over restraints may only reduce but not
eliminate the risk of tip-over.
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the finish and furniture model number
(upper portion of this page), the part letter, production
code, quantity needed, reason for replacement and your
full name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
05/12
Advertisement
Table of Contents
Related Manuals for Whittier Wood 1134AFGSPa
Summary of Contents for Whittier Wood 1134AFGSPa
- Page 1 For a replacement (upper portion of this page), the part letter, production part, directly contact Whittier Wood Products customer code, quantity needed, reason for replacement and your service department by phone, fax, mail or email.
- Page 2 1134AFGSPa; 1134AFCAFa & 1136AFGSPa; 1136AFCAFa Pacific Chest Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and part name. Quantity 1134AFGSPa...
- Page 3 1134AFGSPa; 1134AFCAFa & 1136AFGSPa; 1136AFCAFa Pacific Chest Assembly Instructions Tool Required: Phillips Screwdriver Position the chest at the desired location. Adjustable Glides (U) are attached to the bottoms of the feet. Rotate the glides until the unit stands level. See Figure 1.
Need help?
Do you have a question about the 1134AFGSPa and is the answer not in the manual?
Questions and answers