Wifi Setup - NETGEAR EVA700 User Manual

At the bottom of the television display there are three buttons: Save, Cancel, and
Switch to Manual. You can use Switch to Manual to specify the IP address.
Switch to Manual (Static IP Address)
If your network does not use DHCP, then you must set the IP Address for the
media player to be in the correct subnet range for your network.
Follow the instructions below if you want to manually set the IP address (use a
static IP address).
1. On the bottom of the IP Config screen, select Switch to Manual.
The Switch to Manual button at the bottom of the screen changes to Switch to
Automatic.
2. Use the number buttons on the remote control to enter the IP Address. Use the
OK button to save each number and move to the next field.
3. After the IP address is set, enter the subnet mask.
4. Select the onscreen Save button to save your settings.
5. When prompted, press OK on the remote control to reboot the media player.
IP Addresses and Network Connections
The digital entertainer is set from the factory to get its IP Address from a DHCP
server. If your network does not use DHCP, you must set up the digital entertainer
with a static IP address in the range of addresses on your network.
• If the digital entertainer is set to use DHCP and fails to obtain an IP Address
from the server, it will resort to an auto IP address in the range of 169.254.x.x.
You can use a static IP address if there is a problem connecting the digital
entertainer to the server.
• If the network connection fails, the digital entertainer will time out. Reboot
the unit. For more information, see "Physical Connectivity" on page 4-3.

WiFi Setup

The WIFI Setup screen shows the wireless settings for the network that you
selected for the digital entertainer to use. To view or change the WIFI setup,
follow the steps below.
1. Press Menu on the remote control.
Media Library and Digital Entertainer Settings
Digital Entertainer Model EVA700 User Manual
v1.0, April 2006
3-5