VIA Amplifiers
3.
Insert the wire into the terminals and fasten the clamping device with a POZIDRIV® #1, max. Torque 0.5 Nm (0.37 lb‐
ft).
4.
Slide the insert and the chuck (1) into the housing (2).
5.
Fasten bushing by means of a fork wrench 7/8" (SW 22) min. Torque 2.5 Nm (1.8 lb‐ft).
VIA Amplifiers User Guide V1.0
USER GUIDE
Important:
(a) Align the chuck by positioning the nose into the recess.
(b) Pay attention to the guiding keyway!
10