Muti-Stage Cooking; Energy Saver Mode - Toshiba EM925A5A-BS Instructions Manual

OPERATION

16.Muti-Stage Cooking

At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically
set to be the first stage.
NOTE: Auto Menu cannot be set in Multi-stage Cooking.
EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
a.
Press Memory 3 times; screen displays 3.
Press Time Cook, then press "5" , "0" and "0" to set first stage cook time.
b.
Press Power Level once, then press "8" to choose 80% first stage cooking
c.
power.
d.
Press Time Cook again, then press "1", "0", "0" and "0" to set second stage
cook time.
e.
Press Power Level again, then press "6" to choose 60% second stage cooking
power.
f .
Press
g.
To choose the procedure from the memory list, press Memory three times.
Screen will display "3"; press
NOTE:
If you do not want to save a particular multi-stage program as a procedure, do not
press Memory as the first step. Press

17.ENERGY SAVER MODE

(1)
In standby mode, press the "
starti ng the child lock functi on to enter the Energy Saver mode.
In child-locked mode, press the "
(2)
and release to enter the Energy Saver Mode .
(3)
Above operation is the only way to start the Energy Saver mode.
(4)
The Energy Saver mode works only if the door is closed.
to immediately start multi-stage cooking.
)
to run procedure.
after programming both stages.
" once (less than 3 seconds to avoid
" once (less than 3 seconds)
EN-23