Favorite Function; Muti-Stage Cooking - Toshiba ML-EC42P Instruction Manual

OPERATION

15. FAVORITE FUNCTION

a. Press Favorite to program and choose up to three cooking procedures.Each
procedure will be indicated by 1, 2 or 3 in the display.
b. Press Favorite until your desired procedure number appears in the display.
Press START/+30Sec. to begin it. A maximum of two cooking stages can be set
for each procedure.
c. To program a procedure, follow the steps listed below. Example: Cook food at 80%
Power Level for 3 minutes and 20 seconds; save as memory 2.
• Press Favorite twice; screen displays 2.
• Press Micro , then press "3" , "2" and "0" in order.
• Press Power Level once, then press "8" for "PL 8" to display.
• Press Favorite to save the procedure. Oven beeps once.
Or press START/+30Sec. directly to save and start cooking.
• To choose the procedure from the memory list, press Favorite twice.
Screen will display "2". Press START/+30Sec. to run procedure.
Auto Menu cannot be set in Favorite function.
NOTE

16. Muti-Stage Cooking

At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically set
to be the first stage.
Auto Menu and Preheat cannot be set in Multi-stage Cooking.
NOTE
EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
• Press Favorite 3 times; screen displays 3.
• Press Micro, then press "5" , "0" and "0" to set first stage cook time.
• Press Power Level once, then press "8" to choose 80% first stage cooking power.
• Press Micro again, then press "1", "0", "0" and "0" to set second stage cook time.
• Press Power Level again, then press "6" to choose 60% second stage cooking power.
• Press START/+30Sec. to immediately start multi-stage cooking.
• To choose the procedure from the memory list, press Favorite three times. Screen
will display "3"; press START/+30Sec. to run procedure.
EN-20
INSTRUCTION FOR USE