Cleaning and Care (continued)
Steam cleaning
1
Remove all accessories from the oven .
2
Pour approximately 400 ml (3 / 4 pint) of water onto the bottom of the empty oven . Use
normal water only, no distilled water .
3
Close the oven door .
Caution
The steam cleaning system can be switched on only when the oven
has cooled to room temperature completely . Allow the oven to cool
completely if it does not work .
4
Turn the Divider Select Knob to
steam clean mode .
5
After an amount of time, the heater
completes operating and its lamp
remains on .
7
Turn the Divider Select Knob to "Off"
to end the operation and clean the
interior .
6
When the operation is complete, the
display will blink and a beep indicates
the end .
37
EN