Table of Contents
Advertisement
18
EI65 TROUBLESHOOTING HANDBOOK
5. DRAWING 9, LINERIDER SUPPLY VOLTAGES
The supply voltage can be checked directly at the cannon connection. Using a digital volt
meter measure between pins A and B, (A= +9v) + (B= -9v) = 18volts. If this voltage is not
correct refer to the system wiring diagram and verify all cable connections. You may need
to start at the console and check the supply voltages at their proper measuring points.
031-300-190-035 REVISION A 01/25/99
Advertisement
Table of Contents
