Advertisement
Operations
MEGA BASS
indicator
Remote sensor
Docking Tray
VOLUME + (VOL + on the remote commander) and buttons have a tactile dot.
1
Attach the adapter for your iPod/iPhone.
Before using the unit
To turn on/off the unit
Press (power).
The (power) button indicator will light up in green
when the unit is turned on.
To adjust the volume
2
Set your iPod/iPhone in the Docking Tray.
Press VOLUME +/− (VOL +/− on the remote
commander).
Tips
The (power) button indicator flashes three times when the
sound is set to either maximum or minimum volume.
To reinforce the bass sound
Press MEGA BASS.
The MEGA BASS indicator lights up.
You can achieve high quality bass sound. To return to
normal sound, press the button again.
Power management system
After playback of the iPod (or component connected to
AUDIO IN jack) has finished, if no operation is
performed for about 30 minutes, the unit will
Tip
automatically turn off.
Remove the case or cover from your iPod before setting it in the tray
to ensure a stable connection.
3
Press (direct power-on).
Playing an iPod
The iPod begins to play back.
You can operate the connected iPod via this unit or
When setting an iPod in the unit, use the supplied
the iPod itself.
universal dock adapter with your iPod or commercially
available products from Apple Inc.
To
If you are using an iPhone, iPhone 3G, iPhone 3GS or
Turn off the iPod
iPhone 4, attach the supplied universal dock adapter ,
Pause playback
, or . The respective adapter number is located on
the underside of each adapter.
Supplied Universal Dock Adapter
Go to the next track
Go back to the previous
track
Locate a point while
listening to the sound
Notes
To use an iPod, refer to the user's guide of your iPod.
Locate a point while
The connector of the unit is exclusively for use with an iPod. If you
observing the display on
use a device that does not match the connector, connect it to the
iPod
AUDIO IN jack of this unit with the supplied audio connecting
cable.
Sony cannot accept responsibility in the event that data recorded on
Go back to the previous
an iPod is lost or damaged when using an iPod connected to this
unit.
menu
For details of environmental conditions for operating your iPod,
Go back to the main menu Press and hold MENU*
check the website of Apple Inc.
Select a menu item or a
track for playback
Execute the selected menu
item or begin playback
*
1
During playback, this operation returns to the
beginning of the current track. To go back to the
previous track, press twice.
*
2
These operations are available only when using the
supplied remote commander.
RDP-X60iP_4-278-207-11(1)_U8
Notes
When placing or removing the iPod, hold the iPod at the same angle
as that of the connector on this unit, and do not twist or bend the
iPod as it may result in connector damage.
Do not carry the unit with an iPod set on the Docking Tray. Doing
so may cause a malfunction.
When placing or removing the iPod, hold the Docking Tray
securely.
Before disconnecting the iPod, pause playback.
If the battery of your iPod is extremely low, charge it for a while
before operation.
An iPod touch/iPhone will not work unless it is turned on. Be sure
to turn on the power of the iPod touch/iPhone before operation.
Using the Bluetooth Connection
By using the Bluetooth connection, you can listen to the
sound from an iPod with the unit wirelessly.
Note
For details on how to operate the iPod to be connected, refer to the
user's guide of your iPod.
Supported iPod models
iPod touch 4th generation, iPod touch 3rd generation,
iPod touch 2nd generation, iPhone 4, iPhone 3GS,
iPhone 3G and iPad.
On pairing
What is pairing?
Bluetooth devices need to be "paired" with each other
beforehand.
Once Bluetooth devices are paired, there is no need for
pairing again, except in the following cases:
Pairing information is deleted after repair, etc.
The unit is paired with 9 or more iPod models. The unit can be
paired with up to 8 iPod models. If a new iPod is paired after 8 iPod
models have been paired, the iPod whose latest connection time is
the oldest among the 8 paired iPod models is replaced by the new
one.
On Bluetooth indicator
(JEITA*)
Status
Bluetooth
indicator (blue)
Bluetooth off
Off
Bluetooth on
Flashes slowly
Paring mode
Flashes quickly
Connecting or
Lights up
communicating
To pair with an iPod
Keep the iPod and the unit within 1 meter (3 ft) of each
other for this operation.
Press to turn on the unit.
1
2
Press and hold
until the Bluetooth indicator flashes
quickly.
Pairing mode of the unit is activated.
3
Perform the pairing procedure on your iPod to detect
the unit. Select "Bluetooth" from "General" under
"Settings" on your iPod and turn Bluetooth on.
A list of detected devices appears on the display.
The unit is displayed as "RDP-X60iP. "
If "RDP-X60iP" is not displayed, repeat from step 2.
Press
Press and hold .
To resume play, press it
again.
(forward)
(backward)*
1
(forward) or
(backward) while
playing and hold it until
you find the point.
4
Select "RDP-X60iP" displayed on the screen of the
iPod.
(forward) or
(backward) in pause
When "Connected" appears on the screen of the iPod,
and hold it until you find
connection is complete.
the point then press .
If the below pop-up window appears, select "Pair. "
MENU*
2
2
(up)/ (down)*
2
ENTER*
2
Troubleshooting
Notes
General
The display and operation may vary between iPod models. For
The power is not on.
details, refer to the user's guide of your iPod.
Pairing mode is canceled after about 5 minutes. If pairing mode is
Make sure the AC power cord is connected to the wall outlet firmly.
canceled halfway, start over from step 2.
There is no audio.
If pairing is not complete, start over from step 2.
Adjust VOLUME +/− (VOL +/− on the remote commander).
To pair with another iPod, repeat steps 1 to 4.
If you turn off the unit or the iPod before the Bluetooth connection
Noise is heard.
is complete, pairing information will not be memorized, and pairing
Ensure that the unit is not in the vicinity of in-use portable phones,
will not be completed.
etc.
If Passcode input is required in the display, input "0000. "
Operation of Bluetooth devices (other than iPod) is not guaranteed.
The two different music sources will be mixed
together during playback.
Stop playback of your iPod or external component.
To listen to the sound
The (power) button indicator flashes.
Keep the iPod and the unit within 10 meters (about 30 ft)
If the unit often turns off automatically after flashing, even though
of each other for this operation.
the AC power cord is reconnected, consult your nearest Sony dealer.
Check the following before operating the unit.
The Bluetooth function of your iPod is on.
iPod
Pairing of the unit and your iPod is complete.
Press to turn on the unit.
1
There is no audio.
Make sure the iPod is connected firmly.
2
Press
to turn on the Bluetooth.
Operation is not performed.
3
Start the Bluetooth connection from your iPod.
Make sure the iPod is connected firmly.
The last connected device will be reconnected
The iPod does not charge.
automatically when the Bluetooth function is
Make sure the iPod is connected firmly.
activated again. Press "Connect" (on the screen of the
Make sure the AC power adaptor is connected firmly.
iPod) to connect other devices memorized in the unit.
4
Select music, video, game, etc., to play on your iPod.
Audio-in
For details, refer to the user's guide of your iPod.
There is no audio.
Make sure the Audio connecting cable is connected firmly.
To finish listening
Terminate the Bluetooth connection by any of the
remote commander
operations below.
The remote commander does not function.
Press
to turn off the Bluetooth. (Bluetooth indicator turns off.)
Replace the battery in the remote commander with a new one if it is
Operate the iPod to terminate the connection.
weak.
Turn off the unit.
Make sure that you are pointing the remote commander at the
Operate the iPod to terminate the connection.
remote sensor on the unit.
For details, refer to the user's guide of your iPod.
Remove any obstacles in the path of the remote commander and the
unit.
Make sure the remote sensor is not exposed to strong light such as
To use this unit as a battery charger
direct sunlight or fluorescent lamp light.
for your iPod
Move closer to the unit when using the remote commander.
You can use the unit as a battery charger for your iPod.
If the problem persists, consult your nearest Sony dealer.
Charging begins when the iPod is connected to the unit.
The charging status appears in the display on iPod. For
When using the Bluetooth connection
details, see the user's guide of your iPod.
No sound
Ensure that this unit is not too far from the Bluetooth stereo audio
source device, or this unit is not receiving interference from a
wireless LAN, other 2.4 GHz wireless device, or microwave oven.
Connecting optional
Check that the Bluetooth connection is made properly between this
components
unit and the Bluetooth stereo audio source device.
Pair this unit and the Bluetooth stereo audio source device again.
Keep away from metal objects or surfaces.
You can enjoy the sound from an optional component,
such as a portable digital music player, through the
Sound skips or the correspondence distance is short.
speakers of this unit. Be sure to turn off the power of
If a device that generates electromagnetic radiation, such as a
wireless LAN, other Bluetooth device(s), or a microwave oven is
each component before making any connections.
nearby, move away from such sources.
1
Firmly connect the line output jack of a portable
Remove any obstacle between this unit and iPod or move away from
digital music player (or other component) to the
the obstacle.
Locate this unit and iPod as near as possible.
AUDIO IN jack on the back of the unit, using a
Re-position this unit.
suitable audio connecting cable (not supplied).
Re-position iPod.
Press to turn on the unit.
2
Pairing cannot be done.
Bring this unit and the iPod closer together.
3
Turn the connected component on.
Sound is delayed.
If you watch a TV or a DVD through Bluetooth connection via this
unit, sound may lag behind the picture.
If the problem persists, consult your nearest Sony dealer.
AUDIO IN
DC IN 20V
To external
equipment
Audio connecting
cable (not supplied)
Notes
The audio connecting cable required depends on the external
equipment. Make sure the cable is correct for the external
equipment to be connected.
If the volume level is low, adjust the volume of the unit first. If the
volume is still too low, adjust the volume of the connected
equipment.
When playing an external component connected to the AUDIO IN
jack, stop playback of your iPod.
Disconnect the audio connecting cable when audio-in is not in use.
Compatible iPod/iPhone
models
The compatible iPod/iPhone models are as follows.
Update software of your iPod/iPhone to the latest version
before using it with this unit.
iPod touch
iPod touch
iPod touch
4th generation
3rd generation
2nd generation
iPod nano
iPod nano
5th generation
4th generation
iPod touch
(video camera)
(video)
1st generation
iPod nano
3rd generation
iPod nano
(video)
2nd generation
iPod
(aluminum)
5th generation
(video)
iPod classic
iPhone 3GS
iPhone 4
iPhone 3G
iPhone
Notes
The connector of the unit is solely for use with an iPod. If you use
devices that do not have the same connector, connect to the AUDIO
IN jack of this unit with the supplied audio connecting cable.
Sony cannot accept responsibility in the event that data recorded to
an iPod is lost or damaged when using an iPod connected to this
unit.
RDP-X60iP_4-278-207-11(1)_U8
Advertisement
