Insert The Memory Card; Charge The Battery - Nokia RM-686 User Manual

5. Insert the tabs at the top of the cover into
the slots in the device, and press down on
the other end of the back cover.

Insert the memory card

Use only compatible microSD cards approved by Nokia for use with this
device. Your device supports microSD cards that have a capacity of up to
16 GB. Nokia uses approved industry standards for memory cards, but
some brands may not be fully compatible with this device. Incompatible
cards may damage the card and the device and corrupt data stored on the
card.
1. Remove the back cover.
2. Make sure that the contact area is facing
down, and insert the microSD card into the
card slot.
3. Replace the back cover.
Important: Do not remove the memory card in the middle of an
operation when the card is being accessed. Removing the card in
the middle of an operation may damage the memory card as well
as the device, and data stored on the card may be corrupted.

Charge the battery

Your battery has been partially charged at the factory. If the device
indicates a low charge, do the following:
G e t s t a r t e d
11