Samsung yepp' 20051027153106109 User Manual page 8

Connecting yepp to PC with USB cable
4 Plug one end of the USB cable into the
USB port on the back of the PC.
5 Connect the opposite end of the USB cable to the
USB cable port on the bottom of the yepp.
If you disconnect the USB cable from your PC while implementing a
command or initializing during USB driver installation, your PC may
not function correctly.
6
USB driver is installed with a message saying that it
is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that installation
has been successfully completed.
7 Upon installation of the USB driver
"SAMSUNG YP-780" will appear in the
[System Properties] [Device Manager].
14
How to check USB driver
How to check USB driver
Windows 98:
Control Panel System Device Manager
Universal Serial Bus controllers/Samsung YP-780 Class
Windows 2000:
Control Panel System Hardware
Device Manager Universal Serial Bus controllers
USB Mass Storage Device
Windows XP:
Control Panel System Hardware
Device Manager Universal Serial Bus controllers
USB Mass Storage Device
8
When USB driver is not Installed automatically,
refer to next page.
15