OWNER’S MANUAL STYLER Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times S3*F* MFL66101244 www.lg.com...
TABLE OF CONTENTS TABLE OF CONTENTS Checking the Water Tanks PRODUCT FEATURES Loading the Styler IMPORTANT SAFETY INSTRUCTIONS Hangers Safety Instructions for Installation Using the Moving Hanger Safety Instructions for Connecting Electricity Pants Hanger or Pants Crease Care Basic Safety Precautions Shelf Grounding Instructions Control Panel...
PRODUCT FEATURES PRODUCT FEATURES REMOVE ODORS Use the Styler's Refresh cycle to quickly and easily remove odors from clothes. REFRESH CLOTHING OR ADD AN AROMA Infuse items with the aroma from your favorite dryer fabric softener sheets to keep clothes and accessories looking, feeling, and smelling refreshed.
The product is not injury or product damage when moving the designed for use on ships or airplanes. Check product. with an authorized LG service center for use under other special circumstances. • When moving the Styler away from the wall, be careful not to roll over or damage the • Do not tamper with controls.
Have the wall outlet and circuit • Contact LG or a qualified repair person checked by a qualified electrician to make immediately to repair or replace all sure the outlet is properly grounded. Failure...
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. WARNING To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following: BASIC SAFETY PRECAUTIONS eliminate static unless recommended by the manufacturer of the fabric softener or...
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following: • Do not use heat to dry articles containing •...
PRODUCT OVERVIEW PRODUCT OVERVIEW PARTS interior light hooks for Pants Crease Care moving hanger interior light Pants Crease Care shelf holder door* shelf clip aroma filter steam nozzle hot air circulation vent water water supply tank drain tank drip tray * The door swing can be reversed by the installer to fit the installation location.
If the fit is too loose, it may result in vibration, noise, and damage to clothing. NOTE y Contact the store where the product was purchased or LG customer service at +65 65120555 if any accessories are damaged or missing. Accessories can be purchased separately online at http://www.lg.com y For your safety and for extended product life, use only authorized components.
• Anything that can be securely placed on a the Pants Crease Care feature. This cycle can hanger and steamed or dried without retaining be downloaded using the LG SmartThinQ hanger marks or other damage can be placed app and used as the Downloaded cycle. For on the moving hanger.
PRODUCT OVERVIEW THE SHELF CHOOSING STYLER FEATURES Use the shelf when styling clothes or other items item how to style it that are difficult to hang or that may be damaged by hang drying. suit coat, blazer moving hanger coat, jacket (short) moving hanger coat (long) (remove shelf)
INSTALLATION INSTALLATION INSTALLATION OVERVIEW Please read the following installation instructions first after purchasing this product or transporting it to another location. Remove material from inside and outside of cabinet Check and choose the Level the Styler Unpack and remove proper location shipping material Reverse the door swing Connect to grounded outlet...
INSTALLATION UNPACKING THE STYLER • Remove tape and any temporary labels from the Styler before using. Do not remove any warning labels, the model WARNING and serial number label, or the Tech Sheet y Use two or more people to move and that is located under the front of the Styler.
INSTALLATION INSTALLATION LOCATION REQUIREMENTS WARNING Read all installation instructions completely before installing and operating the Styler. It is important to review this entire manual before installing and using the Styler. The installation requires: y A grounded electrical outlet located within y A sturdy floor to support the total appliance 2 ft.
INSTALLATION Recommended Installation Spacing The following clearances are recommended for the Styler. Although the Styler has been tested 7 3/4 in. for clearances of 1 inch (3 cm) on the sides (20 cm) and rear, recommended clearances should be considered for the following reasons: ...
INSTALLATION LEVELING THE STYLER WARNING WARNING y The Styler is heavy. Use two or more people if installing the rear leveling feet. y To reduce the risk of injury to persons, Failure to do so can result in back injury or adhere to all industry recommended other injury.
If the direction of the door swing by a child or adult standing, sitting, leaning, or needs to be changed after installation, contact placing excessive weight on an open door or the LG Customer Information Center at the interior parts. +65 65120555. •...
INSTALLATION ASSEMBLING THE DRIP TRAY INSTALLING CAP COVERS 1 Line up the nubs on the cap Before using the Styler, insert the drip tray onto cover with the holes in the top the bottom of the cabinet. corner of the cabinet. 1 Hold the tray so the arrow and letter on 2 Snap the cap cover into place. the front of the tray face up. Repeat with the remaining cap 2 Insert one side of the tray first, then cover on the other corner. the other. Push the tray until it slides completely in. INSTALLING HINGE COVERS 3 To detach, pull one side out then the other.
Unpack the shelf and hangers. For instructions on installing or using accessories, see Loading the Styler, pages 25-28. Accessories can be purchased separately from the LG Customer Information Center. +65 65120555. Assemble the drip tray. Insert the drip tray at the bottom of the cabinet. See Assembling the Drip Tray, page 18.
OPERATION USING THE STYLER 1 PREPARE ITEMS • Wash clothes first, if needed. • No heat-sensitive items or items that can be damaged by exposure to water. See Choosing Styler-Safe Clothing, page 21. • Place items on hangers or the shelf. • Fasten buttons and close zippers to keep items on moving hangers and prevent damage.
OPERATION SORTING LOADS Grouping Similar Items • For best fabric care results, always treat fabrics Fabric Care Labels with similar care requirements together. Most articles of clothing feature fabric care labels • Different fabrics have different care that include instructions for proper care. Below requirements, and some fabrics cannot be are some of the symbols that are relevant to treated in certain Styler cycles or should be...
OPERATION FABRIC CARE GUIDE = yes § = check label Refresh cycle Gentle Sanitary fabric clothes comments cycle removing removing cycle wrinkles odors towels, socks, Wrinkles may underwear, remain in 100% cotton jeans, cotton fabrics. sportswear, Iron after cycle, if t-shirts, blankets desired.
OPERATION FABRIC CARE GUIDE (CONTINUED) = yes § = check label Refresh cycle Gentle Sanitary fabric clothes comments cycle removing removing cycle wrinkles odors suit lining, blouses, neckties, acetate pajamas thermal acrylic underwear, Lay clothes on shelf ...
OPERATION CHECKING THE FILTERS Changing the Aroma Sheet BEFORE EVERY LOAD Use a dryer fabric softener sheet to add a refreshing aroma to items. Replace the fabric softener sheet Checking the Lint Filter after every use. Always make sure the lint filter is clean before 1 Remove the aroma filter from the Styler.
OPERATION CHECKING THE WATER TANKS LOADING THE STYLER Check the water in the water tanks before use. CAUTION The water supply tank must be filled with water before using the Styler. The Styler does not work y Check all pockets to make sure that they without water.
OPERATION Hangers Using the Moving Hanger The hangers that come with the Styler are for 1 Insert hangers into slots and pull down to use with the Styler only. Any plastic or metal secure the hook snugly. hanger that has a hook less than 5/32 in. (4 mm) Hooks should fit down in the slots snugly to thick and hooks snugly into the indentations in prevent noise, vibration, or damage to items the moving hanger can be used in the Styler.
OPERATION Opening and Closing the Pants Hanger Using the Pants Crease Care crochet lames du cintre 1 Open the Pants Crease Care by pressing on 1 To open, fold the hook down toward the the icon on the side. hanger blades to unlock and separate the blades. hook hanger blades crochet lames du cintre 2 Once pants are inserted, bring the blades together and rotate the hook up and away from the blades to lock them in place. 2 Hang the pants hanger on the hook above the Pants Crease Care that best fits the length of the pants being pressed. If the pants are longer, use the higher hooks to keep Hanging Pants On the Pants Hanger the pants from hitting the floor of the cabinet.
OPERATION Shelf • Hang the shelf on the shelf holder when treating long clothes such as coats or dresses. Use the shelf for clothes and items that cannot be placed on hangers. Do not stack items on the shelf. For best drying performance, use the shelf for a single item or smaller items with space between.
CYCLE COMPLETION INDICATOR SmartThinQ™ This portion of the display shows which stage of Search for the LG SmartThinQ application from the styling cycle is currently underway (Preparing, the Google Play Store or Apple App Store on a Steaming, Drying, Sanitizing, or Night Care).
OPERATION SANITARY / *Night Care Touch the icon to select a Sanitary cycle. Touch repeatedly to toggle through the settings. See the Cycle Guide, page 31. Touch and hold the icon for three seconds to activate/deactivate the Night Care function. See Night Care, page 35.
OPERATION CYCLE GUIDE Cycle Processes Cycle Setting Clothing / Fabric Type Prepare Steam Sanitize suit, coat, school uniform, scarf, wool, Normal knitwear, outdoor/performance clothing, towels, underwear, t-shirts, socks, jeans, jean jackets, lingerie, sportswear, Light tablecloths 100% wool, polyester, rayon, urethane, gabardine, Gore-Tex, cotton, nylon, ramie,...
OPERATION CHOOSING A CYCLE * Night Care feature cannot be used while using Dehumidify Course Styler cycles are designed to fit a variety of situations. * Use while door is open 45º. If door is closed, Select the cycle and setting that best match the load the course does not operate.
3 Touch Start/Pause. is sprayed on clothes. This is normal. • Download and use the LG SmartThinQ app • The moving hanger will move even when only on a smart phone to confirm the current the shelf is being used.
* Smart Diagnosis™ Use this function with the LG SmartThinQ application on a smart phone or when contacting the LG Customer Information Center to help diagnose problems with the Styler. See Using Smart Diagnosis™, page 45.
OPERATION Night Care Setting the Night Care Function 1 Place clothes into the Styler. Use the Night Care function to store items overnight or anytime items can't be removed soon after a 2 T ouch cycle selector icon repeatedly until cycle ends. Night Care periodically produces warm desired cycle setting is selected. air to prevent condensation, keeping items warm and dry until they are removed.
• To verify the Wi-Fi connection, check that Wi-Fi ( icon on the control panel is lit. SmartThinQ Application • LG SmartThinQ is not responsible for any network The SmartThinQ application allows you to communicate connection problems or any faults, malfunctions, or with the appliance using a smart phone.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.
Use the Smart Diagnosis feature in the SmartThinQ telephone to the LG Customer Information Center. NFC application for help diagnosing issues with the appliance or Wi-Fi equipped models can also transmit data to a without the assistance of the LG Customer Information smart phone using the LG SmartThinQ application.
MAINTENANCE MAINTENANCE Cleaning the Lint Filter Always remove the lint from the filter after every REGULAR CLEANING cycle. See Checking the Lint Filter, page 24. WARNING If the lint filter has become very dirty or clogged, wash the lint filter in warm, soapy water and To reduce the risk of fire, electric shock, or allow to dry thoroughly before reinstalling. injury to persons when using this appliance, • Never operate the Styler without the lint filter.
MAINTENANCE 1 Clean the exterior of the tanks with a wet 3 Make sure the drainage nozzle connected cloth. to the water drain tank and the water supply hole connected to the water supply tank are not clogged. 2 Use a cleaning brush or detergent made exclusively for water tanks to clean the inside of the water tanks. These can be found Drainage nozzle Water supply hole online or at a local RV and camping store. Rinse tanks thoroughly after cleaning with detergent to remove 4 Allow the outsides of the tanks to dry any residue.
TROUBLESHOOTING TROUBLESHOOTING FAQS: FREQUENTLY ASKED QUESTIONS What are aroma sheets and how do I use them? You can use your favorite brand of dryer fabric softener sheets in the aroma filter to infuse items with a refreshing aroma. The sheets will not soften garments or reduce static. To use the aroma filter, add a softener sheet before running a cycle. Dispose of the softener sheet at the end of the cycle. For best performance, clean the aroma filter after every 5-7 uses. See Changing the Aroma Sheet, page 24. Can I put fur, leather, or silk items in the Styler? Download the Air Fresh cycle for use with fur, leather, or silk items in the Styler.
TROUBLESHOOTING BEFORE CALLING FOR SERVICE Your appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your appliance does not function properly or does not function at all, check the following before you call for service. Operation Problem Possible Cause...
TROUBLESHOOTING Operation Problem Possible Cause Solutions Control panel won’t Control panel or button has Dirt or foreign objects on the control panel respond dirt on it will interfere with the operation of the buttons. Clean the control panel. Control panel is locked Disable the Control Lock function.
TROUBLESHOOTING Performance Problem Possible Cause Solutions Wrinkles at back of Item too large for hanger or Use the right size hanger for the item neck after cycle fabric too delicate so the fabric won't bunch up and cause wrinkles. Some fabrics are delicate and will bunch around the hanger no matter what you do.
Should you experience any problems with your appliance, it has the capability of transmitting data to your smart phone using the LG SmartThinQ application or via your telephone to the LG Customer Information Center. Smart Diagnosis™ cannot be activated unless your appliance is turned on by pressing the Power button. If your appliance is unable to turn on, then troubleshooting must be done without using Smart Diagnosis™.
WARRANTY WARRANTY NOTE y When disposing of the appliance, cut off the mains cable, destroy the plug and disable the door lock to prevent children being trapped inside. What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate.