Safety Instructions For Connecting Electricity - LG STYLER S3*F Series Owner's Manual

WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire,
explosion, or electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
• Install and store the appliance where it
will not be exposed to temperatures below
freezing or exposed to the weather. Allow the
product to warm to room temperature before
use if it was delivered in winter or at sub-sero
temperature.
• Do not repair or replace any part of the
appliance or attempt any servicing unless
specifically recommended in the user-
maintenance instructions or in published user-
repair instructions that you understand and
have the skills to carry out. Failure to follow this
warning can cause serious injury, fire, electric
shock, or death.
• To reduce the risk of electric shock, do not
install the appliance in humid spaces such as
a bathroom. Failure to follow this warning can
cause death, serious injury, fire, electric shock,
or product deformation or malfunction.
• Remove all packing items and dispose of all
shipping materials properly. Failure to do so can
result in burns, fire, explosion, or death.
• Connect to a properly rated, protected,
and sized power circuit to avoid electrical
overload. Improper power circuits can melt,
creating electric shock and/or fire hazard.

SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY

• Do not, under any circumstances, cut or
remove the ground prong from the power
cord. To prevent personal injury or damage to
the appliance, the electrical power cord must
be plugged into a properly grounded outlet.
• This appliance must be plugged into a 230-
VAC, 50-Hz grounced outlet protected by
a 8-ampere fuse or circuit breaker. Failure
to follow these instructions can result in fire,
explosion, or death.
• This appliance must be plugged into a
properly grounded outlet. Electrical shock
can result if the appliance is not properly
grounded. Have the wall outlet and circuit
checked by a qualified electrician to make
sure the outlet is properly grounded. Failure
to follow these instructions can create an
electric shock hazard and/or a fire hazard.
• Install the appliance where the plug is
easily accessible. Unplug the appliance
when not in use to avoid risk of fire or
electric shock.
• Unplug the appliance before disassembly
or repair to avoid risk of electric shock.
• The appliance should always be plugged
into its own individual electrical outlet
IMPORTANT SAFETY INSTRUCTIONS
• If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agents
or similarly qualified person in
order to avoid a hazard.
• Keep all packaging from children. Packaging
material can be dangerous for children. There is
a risk of suffocation.
• Do not install near another heat source such
as a stove, oven or heater. Failure to follow this
warning can cause product deformation, smoke,
or fire.
• Do not place candles, smoking materials,
or other flammables on top of the product.
Dripping wax, smoke, or fire can result.
• Remove all protective vinyl film from the
product. Failure to do so can cause product
damage, smoke, or fire.
• The appliance shall be installed in
accordance with national wiring
regulations
which has a voltage rating that matches
the rating plate. This provides the best
performance and also prevents overloading
house wiring circuits which could cause a fire
hazard from overheated wires.
• Do not use an extension cord to connect
to an outlet. Doing so could result in a fire or
electric shock.
• Never unplug your appliance by pulling on
the power cord. Always grip the plug firmly
and pull straight out from the outlet. The
power cord can be damaged, resulting in a
risk of fire and electric shock.
• Contact LG or a qualified repair person
immediately to repair or replace all
power cords that have become frayed or
otherwise damaged. Do not use a cord that
shows cracks or abrasion damage along
its length or at either end. The power cord
can melt, creating electric shock and/or fire
hazard.
• When installing or moving the appliance,
be careful not to pinch, crush, or damage
the power cord. This will prevent injury and
damage to the appliance from fire and electric
shock.
5