Display Options - Samsung DVD-V9650 Instruction Manual

D V D O

Display Options

TV Aspect
Depending on the type of
television you have, you may
want to adjust the screen
setting (aspect ratio).
- 4:3 Letter Box: Select when you want to see the total 16:9
ratio screen the DVD supplies, even though you have a TV
with a 4:3 ratio screen. Black bars will appear at the top
and bottom of the screen.
- 4:3 Pan Scan: Select this for conventional size TVs when
you want to see the central portion of the 16:9 screen.
(Extreme left and right side of movie picture will be cut off.)
- 16:9 Wide: You can view the full 16:9 picture on your wide
screen TV.
Black Level
The Black Level feature
adjusts black reference level
in the video signal to one of
two choices:
- On: This will enhance the
Black Level for increased
brightness/contrast when
viewing DVDs.
- Off: This is the Standard NTSC reference Black
Level for consistent brightness/contrast across all sources.
Alt Video Out
The "Alt Video Out" option
must be set in the on-screen
menu to enable the output
you have connected to your
TV.
- COMPOSITE/S-VIDEO: Select when you want to use S-
Video or Composite (Video) output.
- COMPONENT (I-SCAN): Select when you want to use
Component interlace(480i) Out.
- HDMI/COMPONENT (P-SCAN) : Select when you want to
use the Component(480p) or HDMI(480p/720p/1080i) out.
P E R AT I O N S
On
ENG-64
Note
It cannot be adjusted when
set to Progressive.
- See your TV owner's manual to
determine what type of TV you have.
- COMPONENT (I-SCAN): Interlaced
Scan mode will work.
- HDMI/COMPONENT (P-SCAN):
Progressive Scan mode will work,
and Video and S-Video will not work.
- Press the P-SCAN button on the
front panel in stop mode.
Be sure to set the correct Video
output for the proper picture.
Alt Video Out is