Table of Contents
Advertisement
Storing Channels in Memory (Automatic Method)
Auto Channel Memory will automatically seek and store all active channels in your area.
5
Press the "&# buttons to
select
Auto Channel Memory,
% or ENTER
then press the
button.
The DVD-VCR will
automatically search for all
available channels in the
selected tuner band.
This procedure may take a few
minutes to complete.
When finished, the lowest
channel found will be
displayed.
Adding and Erasing Channels (Manual Method)
Use this feature if
Auto Channel Search missed a channel that you would like to add, or to delete a channel you
wish to remove.
6
Press the "&# buttons to
select
Channel Add/Delete,
% or ENTER
then press the
button.
7
Press the CH "&#!buttons to
tune in the channel number
you wish to add or delete.
Use the number button to
select the channel directly.
8
Press the $ or % button to
delete the channel from your
channel list or to add.
Repeat steps 7 to add or
to delete additional channels.
Press the
MENU button to exit.
I
S
N I T I A L
E T U P
CHANNEL ADD/DELETE
Select channel :
and press [%] to ADD
press [$] to DELETE
RETURN
CHANNEL ADD/DELETE
Select channel :
(in memory)
and press [%] to ADD
press [$] to DELETE
RETURN
Note
Do not turn the power
Channel Memory function is proceeding.
If the power is off, Auto Channel Memory
should be reset.
[07]
CH "#
[07]
Note
CH "#
Use the number button to access the
channel directly.
ENG-29
off when Auto
Hide quick links:
Advertisement
Table of Contents
