Connection And Configuration Settings - Menvier Security MAB50R Installation Manuals

8. Connection and Configuration Settings.

8.1. Field Wiring.
The Loop wiring is accessed through the back plate of the Detector Head (See Fig 4). The small 2-pin
connector on the left is not used.
8.2. DIP Switch Settings.
Access to the configuration settings is through the back plate of the Detector Head (See Fig 4). The 4-way DIP
is used to select the beams sensitivity.
8.3. Typical Single Zone Wiring.
Fire Panel
Connections
Loop Finish Loop Start
22318.37.01 15.09.05
www.acornfiresecurity.com
MAB50R & MAB100R
Connections
Loop IN
Loop +ve
8
www.acornfiresecurity.com
Loop OUT
Suitable fire rated cable
Loop -ve
Junction box,
join screens here
2 core + screen cable
to next device in Loop
From last
device in Loop