6.3. Alignment Process Flow Diagram.
Repeat the
process for the
other thumbwheel
22318.37.01
15.09.05
www.acornfiresecurity.com
After selecting alignment mode
wait until both LED's stop
flashing
Slowly adjust a thumbwheel in
one direction and observe the
LED's
Amber
LED
flashing?
Reverse the
direction of the
thumbwheel
No
Both
thumbwheels
adjusted?
Yes
For optimum alignment,
deflection of the beam in
all four planes should
cause the Amber LED to
flash first
Exit Alignment
Mode and enter the
Operating Mode
www.acornfiresecurity.com
Stop turning the
Red
thumbwheel and
wait for the Red
LED to stop
flashing.
Slowly turn the
thumbwheel in the
same direction
Amber
LED
flashing?
Neither
Stop turning the
thumbwheel.
6
Red