Data Scanning - PPE Xcelerator User Manual

DATA SCANNING

View the real-time engine data while the vehicle is running.
STEP 1
Locate the OBD II diagnostic port on your vehicle.
(See page 7 for reference pictures)
STEP 2
Connect the Xcelerator into the vehicle's diagnostic port. When prompted
turn the ignition key to the RUN position (DO NOT start engine); the
Xcelerator will load through a series of screens and stop. The main menu
will load as shown:
STEP 3
Selection arrow will be on the "Tune Engine" option. Press DOWN on the
keypad to go down to "Data Scanning" then press YES.
View real-time engine data for mph, engine temperature, engine rpm, air filter
intake temperature, intake manifold air temperature, throttle percent, mass air
flow, barometric pressure, manifold turbo boost pressure and more.
Press NO on the keypad to go back to the main menu.
T une Engine
Current T uning
Data Scanning
Diag. Options
15
Xcelerator User Guide