Installing Tune Into Vehicle Ecm; Xcelerator Owners - PPE Xcelerator User Manual

INSTALLING TUNE INTO VEHICLE PCM
STEP 1
Locate the OBD II diagnostic port on your vehicle.
(See page 7 for reference pictures)
STEP 2
Connect the Xcelerator into the vehicles diagnostic port. When prompted,
turn the ignition key to the RUN position (DO NOT start engine). The
Xcelerator will load through a series screens and stop. The main menu will
load as shown:
STEP 3
The selection arrow will be on the "Tune Engine" option. Select YES on
the keypad.
Carefully read the message using DOWN arrow on the keypad.
If you are going
past this screen
you have Read
and Agreed to
Accept by pressing YES on the keypad.
STEP 4
The programmer will check your VIN #, unlock your PCM and save the
vehicle's stock information. Do not disturb the Xcelerator or start the
engine during this download and testing process. (approx 5-10 mins.)
Any interference during the programming process (ie. opening or
closing of your vehicle's doors) may cause a communication error
with your vehicle's PCM and will result in your vehicle not starting!
T une Engine
Current T uning
Data Scanning
Diag. Options
the Disclaimer
provided in the
package.
9
Xcelerator Owners Manual Xcelerator User Guide
Accept Y or N