PPE Xcelerator User Manual page 12

STEP 8 (continued)
The Xcelerator will display the following screen to confirm your installation.
You can press UP or DOWN to select "Install Tune" or "Return to Stock".
Install Performance tune by pressing YES on the "Install Tune" option.
Note: Select "Return to Stock" option if you do not wish to continue with
installation and factory settings will be restored.
STEP 9
The Xcelerator will now run through a series of screens.
Any interference during the programming process (such as opening or
closing of your vehicle's doors) may cause a communication error with
your vehicle's PCM and will result in your vehicle not starting!
(
approx 5-10 min.
The final installation screen will show the following message:
Turn ignition key off. Unplug the tuner from the OBD II port. Re-install the fuses.
Installation complete, you can now operate your truck.
Install T une
Return to Stock
/ Y to Select
)
Installing Your
Selected T uning
Accessing
Stock Data
Unlocking PCM,
Do Not Disturb
or Start the
Engine.
Please Wait for
15 Seconds
Power Increased
T urn Key Off and
Remove the T uner
From Your Truck
Selected T uning
Making Changes
Selected T uning
DO NOT Disturb00
11
Xcelerator User Guide
Installing Your
to Stock Data
Installing Your