Advertisement
3.Click "Start","Control Panel"(make sure you're in Classic
View),and then double-click Bluetooth Devices.Select
"Add".
4.In the Add Bluetooth Device Wizard,select the "My
device is set up and ready to be found check box",and
then click"Next".
5. After icon of "Bluetooth Keyboard" appear ,click
"Bluetooth Keyboard",and then click "Next".
Bluetooth Keyboard
New Device
6.When the wizard asks you which passkey you want to
use,click "Choose a passkey for me".Then click "Next".
7.After you are prompted to enter your passkey , please
type the passkey on Bluetooth Keyboard,and then press
Enter.You also can choose no passkey to go next step.
PLEASE DO REMEMBER TO USE THE KEY OF
BLUETOOTH KEYBOARD WHEN INPUT PASSKEY.
8.In the final page of the wizard, click Finish, it maybe
take a few seconds for new hardware driver installation
before click finish. So please be patient.
Your Bluetooth Keyboard should now be successfully
paired with your PC and ready to use.
9.LED3 will goes out when connection is established
successfully.
NOTE: keyboard functions WILL NOT work until a
bluetooth connection with the computing device is
completed.
Windows 7
(Bluetooth Receiver is not included)
Plug bluetooth receiver into any vacan USB port on
your computer, please be patient to wait the system
recognize your device, it maybe take several minutes.
When new hardware has finished driver installation,
an icon will appear in the task bar.
Right click icon of bluetooth, select "Add a Device"
Advertisement
