Sample Rate Select; A/B Swap - pro bel V1635V-100 User Manual

24-bit aes audio variable delay module
Table of Contents

Advertisement

Vistek V1635V-100 24-bit AES Audio
Variable Delay Module
·
·
Video reference is only available at 48KHz, AES ref, Inp. A ref and Inp. B ref are available at
32kHz and 48kHz, and Free Run ref is available at all sample rates.
3.2.4
The sample rate of the V1635V may be selected and the present setting may be seen on the
SPS LEDs when Page 0 Panel Adjustment mode has been entered and SPS selected as a
parameter. The selectable options will depend on the V1635V variant as follows:
·
·
3.2.5
A transposition of AES A and AES B inputs may be invoked and the present setting may be
seen on the character display as a letter combination when Page 0 Panel Adjustment mode
has been entered and A/B Swap selected as a parameter.
·
·
Issue 8.0
On cards with digital outputs and digital inputs, either of the two AES input
channelpairs may also be used as reference and the options become A, B, Free
Run, AES, or Video
If an external reference fails, the appropriate LED will flash and the V1635V will
default to Free Run mode with reference from the internal crystal oscillator.

Sample Rate Select

On cards with analog outputs, the SPS refers to the internal sample rate and is
fixed at 48kHz.
On cards with digital outputs, the SPS refers to the internal and output sample
rate and may be set to 32kHz, 44.1kHz or 48kHz.

A/B Swap

When input channelpairs A and B are routed to output channelpairs A and B
respectively, the A/B Swap parameter is Normal and is indicated on the character
display as A-A.
When input channelpairs A and B are transposed to output channelpairs B and A
respectively, the A/B Swap parameter is Swapped and is indicated on the
character display as A-b.
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

V1635va-100V1635vd-100V1635vV1635vdV1635va

Table of Contents