Table of Contents
Advertisement
VISTEK V6333E/D & V6333Q/D
hd/sd sdi digital audio multiplexer
3.7
Engineering Menu
3.7.1
Audio Group Enables
Each group half can individually be turn off, or muted. If both halves of the group are turned off then the
group will not be embedded at all, otherwise silence is embedded into the off channel.
En Grp1.1
G1.1 On
G1.1 Off
G1.1 Mute
En Grp1.2
Etc ...
3.7.2
Audio Group Resolution
When embedding audio onto HD SDI the resolution of the audio is always 24 bits. SD on the other hand
uses extended data packets to increase the resolution of the embedded audio from 20 bits to 24 bits. By
default the resolution of the audio embedded onto SD SDI is 20 bits, but it can be changed here to be 24
bits. The control therefore has no effect when the input is HD.
Grp1 Res.
Grp1 20b
Grp1 24b
Grp2 Res.
Etc ...
3.7.3
Ancillary Data Blanking
If the SDI into the V6333 has audio already embedded on the selected group, it is necessary to remove any
data already in the ancillary data space, or select another group. This can be done by setting
ENG'ING:Anc Data to Anc Blnk.
If the Ancillary data is set to be blanked then ALL data in the horizontal ancillary HANC space will be
removed, not just the audio data.
3.7.4
Group Deletion
Setting the MuxGpDel control to Grp Del will mark for deletion any groups already embedded on the input
video if they are to be embedded on. The original embedded group's data is still present in the blanking of
the output video, but the identifier for the data is changed to a reserved deletion code. New embedded data
is appended to any data already present in the blanking of the input video.
It is possible to run out of blanking space if data already exists there, particularly with SD. If this happens
the embedded audio will be corrupt.
By setting Anc Data to Anc Blnk full use can be made of the blanking space, and the MuxGpDel control
has no effect.
HU-V6333E/D&Q/D
Control for the first half of group 1
Turn the first half On
Turn the first half Off
Mute the first half
Control for the first half of group 2
Control for Group 1's audio resolution
limit the embedding of audio onto SD to 20 bits
Let the embedding of audio onto SD be 24 bits
Control for Group 2's audio resolution
15
Advertisement
Table of Contents
