Advertisement
KC M-RACK GENERAL INSTALLATION GUIDELINES
9.
10.
11.
12.
PRODUCT REGISTRATION
Thank you for becoming part of the KC HiLiTES family and purchasing one of our premium KC
products! With over 45 years of history in the auxiliary lighting market, you have become a part
of our ever growing family, and we encourage you to register your product online at
REGISTER.KCHILITES.COM
KC HiLiTES, Inc. | 2843 W. Avenida De Luces Williams, AZ 86046 |
Installing the M-Racks Logo Plates
Line up the M-Racks Logo Plate with the 4-holes on the front
section of the Support Rails. Use the supplied rivets and a blind
rivet tool to attach the Logo. Note: the M-Rack Logo plates ship
loose and unfinished to make customized finishing easy.
Attach the Side Lights (Optional)
Attach the side light mounting plates onto the carriage bolts that
were previously installed on the side channels of the extrusion.
Thread the nuts onto the stud that is attached to the 10" light.
Aim and position the lights to the desired location, and securely
tighten the hardware to lock the lights in place.
Attach the Light Bar (Optional)
Holding the light bar in place, thread the socket cap screw and
fasten the light into position. Be sure to aim the lights to the
desired location before tightening down (this works best at night).
For a Pro6 Installation, please refer to the Pro6 instruction manual.
KC Rear Chase Bar (Optional)
Fit the Rear Chase Bar bracket onto the previously installed carriage
bolts on the rear extruded cross bar. Hand-tighten the 1/4-20 nuts
to hold the brackets in position. Install the1/4" hex bolts into the
KC Rear Chase Bar by removing the end cap and sliding the hex
head into the extruded channel. Re-install the end cap and position
the 1/4" hex bolts into the Chase Bar brackets. Once the light is in
the desired position, securely fasten the Rear Chase Bar.
to ensure you get all the benefits of owning a KC HiLiTES product.
support@kchilites.com
| (888) 689-5955
HTTP://
4
Advertisement
