KC M-RACK Installation Instructions Manual

Standard application

Download this manual

Please read all instructions before beginning installation. These guidelines are provided in good faith to help prevent any

issues arising from errors during installation. The manufacturer of this product shall not be held responsible for any user

actions taken or not taken during installation. There are many details of the installation that are assumed to be general

mechanical knowledge to experienced installers; which are not detailed in these instructions. These installation guidelines

are intended to serve as professional recommendations and are not as a step-by-step, fail-safe installation checklist.

Selection of an experienced installer is the sole responsibility of the project owner.

Parts Included: (Lights are sold separately)

KC M-Rack:

A - Driver side - Support Rail (1)

B - Pass. Side - Support Rail (1)

C - Extruded Cross Bars (5)

D - M-Racks Logo Plate (2)

E - Blind Rivets (8)

F - M6 Rivnut (10-14)

G - Button Head Allen Cap Screw (20)

H - 1/4" Washer flat (20)

I - M6 Button cap screw

INSTALLATION INSTRUCTIONS

IMPORTANT:

Front Light Bar:

A - KC Led Light Bar (1)

B - M8 Socket cap (2)

C - M8 washer (2)

STANDARD APPLICATION

KC M-Rack Shown with lights

Chase Bar:

A - 28" KC Rear Chase Bar

B - 1/4-20 Carriage Bolts (4)

C - 1/4-20 Hex Bolts (4)

D - 1/4-20 nut (8)

E - Rear light bracket (2)

KC M-RACKS

Side Lights:

A - 10" KC LED Side Light

B - 1/4-20 Carriage Bolts (4)

C - 1/4-20 nut (4)

D - Side light bracket (2)

*can hold a total of 4

side lights

Page 1 *can hold a total of 4 F - M6 Rivnut (10-14) side lights G - Button Head Allen Cap Screw (20) H - 1/4” Washer flat (20) I - M6 Button cap screw Copyright 2018 KC HiLiTES, Inc. Rev: 05052018 - KC3267M REV 1.3...
Page 2 Due to manufacturing tolerances of the hardware, some of the carriage bolts will slide easier than the others. One side will slide easier than the other. KC HiLiTES, Inc. | 2843 W. Avenida De Luces Williams, AZ 86046 | support@kchilites.com | (888) 689-5955...
Page 3 Mask off Roof of the Vehicle Carefully mask off the area where the M-Rack is going to be installed. Provide plenty of coverage to prevent any surfaces of the vehicle from getting damaged during rack placement. Be sure to select tape that will not damage the paint or leave behind any excess adhesive residue.
Page 4 Rear Chase Bar. PRODUCT REGISTRATION Thank you for becoming part of the KC HiLiTES family and purchasing one of our premium KC products! With over 45 years of history in the auxiliary lighting market, you have become a part...