Setting The Drc (Dynamic Range Compression); Setting The Av Sync; Setting The Hdmi Audio - Samsung HT-WX70 Instruction Manual

Settings
(Con't)

Setting the DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital
sound when watching movies at low volume at night.
1
In Stop mode, press the MENU button.
2
Press the Cursor
3
Press the Cursor
ton.
MOVE ENTER RETURN EXIT
4
Press the Cursor
When the Cursor
pressed, the effect is smaller.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
CHANGE RETURN EXIT

Setting the AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match
the video.
1
In Stop mode, press the MENU button.
2
Press the Cursor
3
Press the Cursor
button.
MOVE ENTER RETURN EXIT 4
Press the Cursor
press the ENTER button.
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
MOVE SELECT RETURN EXIT
52
button to move to <Audio> and then press the ENTER button.
button to move to <DRC> and then press the ENTER but-
, button to adjust the DRC.
button is pressed, the effect is greater, and when the Cursor
button to move to <Audio> and then press the ENTER button.
button to move to <AV-SYNC> and then press the ENTER
, button to select the AV-SYNC Delay Time and then

Setting the HDMI Audio

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
MOVE ENTER RETURN EXIT
button is
MOVE SELECT RETURN EXIT
1
In Stop mode, press the MENU button.
2
Press the Cursor button to move to <Audio> and then press the ENTER button.
3
Press the Cursor button to move to <HDMI AUDIO> and then press
the ENTER button.
4
Press the Cursor , button to select <ON> or <OFF> and then press
the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
•
OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• The HDMI AUDIO is not available when using the HDMI IN function.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
ENG
53