System Setup; Fast Playback; Setting The Language; Compatible Devices - Samsung HT-TZ212 User Manual

playback

Fast playback

During playback, press the , button.
•
Each time you press either button, the playback speed
will change as follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.

Compatible Devices

1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc
in Windows (2000 or later) without additional driver installation.)
2. MP3 Player: HDD and fl ash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
•
Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
•
You may experience a difference in playback quality when you connect a USB1.1 device.
•
For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
•
Depending on the manufacturer. the USB card reader may not be supported.
•
If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
Supported Formats
File
Format File name
extension
Still Picture JPG JPG .JPEG
MP3 .MP3
Music
WMA .WMA
WMV .WMV
Movie
DivX
.AVI,.ASF
•
CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require additional program installation when connected to a
PC are not supported.
•
A device using NTFS fi le system is not supported. (The system supports only the FAT fi le system and
will not play a movie larger than 1 GB in USB mode.)
•
Some MP3 players, when connected to this product, may not operate depending on the sector size
of their fi le system.
• The USB host function is not supported if a product that transfers media fi les by its manufacturer-
specifi c program is connected.
•
Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
• The USB host function of this product does not support all USB devices. For information on
supported devices, see page 67.
50
Sampling
Bit rate Version Pixel
Frequency
– – 640x480 –
80~384kbps – – 44.1kHz
56~128kbps V8 – 44.1kHz
4Mbps V1,V2,V3,V7 720x480 44.1KHz~48KHz
DivX3.11~
4Mbps 720x480 44.1KHz~48KHz
DivX5.1, XviD

system setup

For your convenience, you can set this DVD Home Cinema's features for the best use in your home
environment.

SETTING THE LANGUAGE

OSD(On-Screen Display) language is set to English by default.
1. In Stop mode, press the MENU button.
▼ button to move to Setup and then press the
2. Press the Cursor
ENTER button.
3. Select Language and then press the ENTER button.
▲,▼ button to select OSD Language and then
4. Press the Cursor
press the ENTER button.
▲,▼ button to select the desired language
5. Press the Cursor
and then press the ENTER button.
•
Once the setup is complete, the OSD will be English if
English has been selected as language.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
•
OSD LANGUAGE : Selecting the OSD Language
•
AUDIO : Selecting the Audio Language (recorded on the disc)
• SUBTITLE : Selecting the Subtitle Language (recorded on the disc)
•
DISC MENU : Selecting the Disc Menu Language (recorded on the disc)
a If the language you selected is not recorded on the disc, menu
language will not change even if you set it to your desired language.
•
OTHERS : To select another language, select OTHERS and
enter the language code of your country (see page 68).
AUDIO, SUBTITLE and DISC MENU languages can be
selected.
MOVE ENTER RETURN EXIT
MOVE ENTER RETURN EXIT
MOVE ENTER RETURN EXIT
MOVE SELECT EXIT
RETURN
51