Dometic MAGICCOMFORT MSH300 Installation And Operating Manual page 11

MSH300
Observe the following instructions when working with electrical parts:
• When testing the voltage in electrical cables, only use a diode test lamp
(fig. 1 8, page 3) or a voltmeter (fig. 1 9, page 3).
Test lamps with an illuminant (fig. 1 12, page 3) take up voltages which are too
high and which can damage the vehicle's electronic system.
• When making electrical connections (fig. 3, page 4), ensure that
– They are not kinked or twisted
– They do not rub on edges
– They are not laid in sharp-edged ducts without protection.
• Insulate all connections.
• Secure the cables against mechanical wear with cable binders or insulating tape,
for example to existing cables.
Observe the following instructions when using the seat heater:
• Do not place any sharp or heavy objects on the seat, as the seat heater could
otherwise be damaged.
• Persons with an impaired sensitivity to heat should only operate the seat heating
on level 1.
• Do not place any heat insulating objects, such as blankets or coats, on the seat
when the seat heater is switched on.
• The seat heater can be damaged by fluids spilt on the seat.
• Never switch the seat heater on when it is wet.
EN
Safety and installation instructions
11