Paradox NV75M User & Installation Manual

NV75M/MX
Installation Manual V1.0
16 Meter Indoor Dual
Mironel Optics with Anti-Mask
and Pet Immunity Dual Detector
General Description
The NV75M/MX is an indoor industry-leading detector providing
superior 16 meter detection with rock solid stability thanks to the
revolutionary dual Mironel Mirror/Fresnel PIR optics. Combined with
Paradox true Pet Immunity and best-in-the industry active Anti-Mask
technology (EN Grade 3). The NV75M/MX provides an unmatched
high security solution for any indoor installation.
Installing the NV75M/MX (Fig. 1)
Step 1
COM
NV75M
1 2 3
Cover Tamper
(Table 1)
Wall Mount
Wiring Entry x2
Tamper Screw
Wall/Corner
Bracket Mount
1
3
2
NV75M-EI00 03 2016
Step 2 Step 3
+
ALM COM TMP AM
RED BLK GRN YEL
NV75MX
Wall Mount x6
Bracket Adjustment
Screw Opening
Corner Mount x4
4
Creep Zone/Pet Selection
Note: Remove detector assembly as described in Fig. 1. When
selector is UP, Pet Mode; when DOWN, Creep Zone is active and
there is no Pet Immunity.
Dip Switch Settings
DIP SWITCH
1. LED
2. EDGE
3. FUTURE
Sensitivity Settings
LED Display
Feature
Tamper open
PIR sensitivity level setting
Alarm detection
Booting/Tamper close
Anti-mask detection
Programming the NV75MX via Keypad or Baby-
Ware
Via Keypad
1. Enter EVO Installer Programming Mode, programming section
4003.
2. Enter the detector's 8-digit Serial Number. Enter the 3-digit
Section as per Table 2.
5
UP - Pet DOWN - Creep
Table 1
OFF ON (DEFAULT)
OFF
DUAL
FUTURE
11m*
9m
13m
7m 16m
LED Status Indicator
Green: ON for 0.3 seconds every 30
seconds
Green: Flashes 1-5 times according
to the selected level
Red: ON for 3 seconds
Green/Red alternating flashes
for 45 seconds
Flashes orange rapidly (pre-alarm
state) and then constant orange when
in alarm.
ON
SINGLE
FUTURE
paradox.com