Demo Software Configuration; Reader Connection; Antenna & Rf Power Setting - Marktrace MR6221 User Manual

◢MR62XX Serial UHF reader user manual（Ver 1.0）◣
20
All above configuration will be valid only after click left bottom
button"set" button

5.2 Demo software Configuration

5.2.1 Reader connection

Click MR62XXDemo.exe software, input reader's IP into the IP input box
(Default IP: 192.168.1.200, Port: 100 which is fixed), then click 'connect' ICON,
software information display box will display the reader's parameter on the
success connection. Below image demonstrate the success connection.
5.2.2 Antenna & RF Power setting
1 On MR62XXDemo.exe software's Setting interface, query and set Antenna's
RF Power on Power setting; Query and set Antenna on Antennas Setting. Take
below image for the reference.
Address：
Floor5/7, Block D,Changyuan New Material Port, No 2 Central 1st Hi-tech Av., Nanshan Shenzhen, P.
R.C.
Post：518057
Phone：0755-2654 6392 FAX：0755-2655 3743
E-mail：technical@marktrace.com Website：www.marktrace.com