DIGITAL
HDMI IN
HDMI IN
S
S
AUDIO IN
OPTICAL
Optical Cable
(not supplied)
Set-Top Box
OPTICAL
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1.
Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
2.
Press the FUNCTION button to select D.IN input.
•
The mode switches as follows : BD/DVD
✎
NOTE
To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
This system supports only DTS and Dolby Digital audio, MPEG audio (bit stream) is not supported.
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
1.
Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.
•
Be sure to match connector colors.
2.
Press the FUNCTION button to select AUX input.
•
The mode switches as follows : BD/DVD
✎
NOTE
You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.
Connecting Audio from External Components
HDMI OUT
HDMI OUT
LAN
LAN
COMPONENT OUT
COMPONENT OUT
AUX IN
WIRELESS LAN
WIRELESS LAN
VIDEO OUT
VIDEO OUT
Red
White
VCR
AUX
D. IN
AUX
HDMI. IN1
D. IN
AUX
HDMI. IN1
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
HDMI. IN2
FM
HDMI. IN2
FM
27
English