Advertisement
X 2
7
X 2
8
24
X 8
26
X 16
X 8
27
X 8
28
X 1
3
X 1
4
FIG.3
7. Attach one end of the Linkage Tube (#8) to the inside of the Curved Outer Leg (#5) using one Bolt (#24), two
Washers (#26), one Spacer (#27) and one Nut (#28). See FIG. 3A.
8. Repeat the same for the other end of this Linkage Tube, only attaching it to the outside of the Curved Inner Leg (#6).
9. Attach one end of the Linkage Tube with Stop Bracket (#7) to the inside of the Curved Outer Leg (#5) using
one Bolt (#24), two Washers (#26), one Spacer (#27) and one Nut (#28).
10. Repeat the same for the other end of this Linkage Tube, only attaching it to the outside of the Curved
Inner Leg (#6). See FIG. 3B.
11. Repeat the above steps for the other table half.
FIG. 3
6
4
24
8
5
8
28
26
6
5
5
27
26
28
7
3
FIG. 3B
26
27
FIG. 3A
26
3
7
24
4
Advertisement
