Motorola DCT 700 Installation Instructions page 2

Shaw digital box

Hide thumbs Also See for DCT 700:

D. Connect the included RCA/AV cable (black cable with

red, yellow and white ends) from the Digital box to

your TV. Both video and audio travel through RCA/AV

cables. Note the input you plugged the cables into on

the back of your TV (i.e. Video 1, Video 2, etc.).

RCA In

STEP 3

NOW WE JUST NEED TO GET YOUR BOX ACTIVATED.

A. Turn on your Digital box by pressing the CABLE power button, located in the top right hand corner of the included

Shaw remote. An amber light on the front of the Digital box will display when the power is on.

B. Tune your TV to the video input (i.e. Video 1, Video 2, etc.) that you plugged the Digital box into in step 2-D.

C. Activate your Digital box online by visiting SHAW.CA/ACTIVATIONS. Make sure you have your serial number and

account number ready.

If you do not have Internet access, or need additional help, please call us at 1.888.270.2433

D. To program your Shaw remote to work with your TV (adjust volume etc.), follow the "Quick Setup" instructions on the

reverse of the remote or visit www.urcsupport.com/shaw.

Note: Once your Digital box is activated it may take a few minutes for your on-screen programming guide to display and

up to 30 minutes for program information to load.

Television

RCA out

E. Connect the included power pack from the wall power

outlet to the Digital box.

Power Pack

SD_INSTALL_SEPT12