Huawei SUN2000 User Manual page 35

SUN2000 (8KTL-28KTL)
User Manual
Context
Figure 4-7
Figure 4-7 SUN2000 rear view
1. Heat sink
Procedure
Step 1 Determine the positions for drilling holes using the rear panel in the packing case, and mark
the hole positions using a marker, as shown in
Issue 07 (2014-07-30)
shows the SUN2000 rear view.
 If the installation location is near the ground, first connect the PGND cable to the ground before
installing the SUN2000 on the wall.For details, refer to
 You are advised to install the SUN2000 in a position in the same height as your eyes to facilitate
operation and maintenance.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2. Mounting brackets
5.1 Installing PGND
Figure 4-8.
4 Installation
Cables.
29