Safety; Introduction; General Safety Rules - MAGIC FX CO2 Power Jet Manual

User Manual MAGICFX® CO2 Power Jet

6. SAFETY

6.1

INTRODUCTION

The CO2 Power Jet has been designed and constructed in such a manner that it can be used safely.
This applies to the use, the circumstances and the regulations as described in this documentation.
Reading this documentation and following the instructions are therefore necessary for everyone who is
authorised to work with the CO2 Power Jet.
The CO2 Power Jet must be placed and used in surroundings that preferably:
- Have a reasonably stable temperature of between 0 and 30ºC.
- Have a relative humidity degree of no more than 75%.
- Are reasonably free of dust, corrosive gases and high concentrations of organic vapours.
- Are not situated in the vicinity of a source of vibration.
6.2

GENERAL SAFETY RULES

Only use the CO2 Power Jet if there are no people, animals or other objects in the direction of the
-
output within the output distance. The shooting direction is the direction in which the output pipe
on the CO2 Power Jet is pointed. The output distance depends on the humidity in the air.
- Make sure that children, unauthorised people and animals do not obtain access to the CO2 Power
Jet!
- Safety devices may not be removed or disabled.
- All required safety devices must be in good condition and function properly.
- Ensure sufficient lighting of the surroundings.
- Keep the workplace clean.
- Only authorised persons may carry out work with the CO2 Power Jet.
Page 7