Table of Contents
Advertisement
2
BLAST SAFELY!
The MAGICFX
PSYCO2JET has been designed and constructed in such a manner that it can be
®
used safely. This applies to the use, the circumstances and the regulations as described in this
documentation. Reading this documentation and following the instructions are therefore
necessary for everyone who is authorised to work with the MAGICFX
The MAGICFX
PSYCO2JET must be placed and used in surroundings that preferably:
®
• Have a reasonably stable temperature of between -10 and 50°C.
• Have a relative humidity degree of no more than 90% (non condensing).
• Are reasonably free of dust, corrosive gases and high concentrations of organic vapours.
• Are not situated in the vicinity of a source of vibration.
2.1
GENERAL SAFETY RULES
• Only authorised persons may carry out work with the MAGICFX
• Do not use the MAGICFX
• Make sure that children, unauthorised people and animals do not obtain access to the
MAGICFX
PSYCO2JET.
®
• Make sure there are no freestanding objects or objects that can be damaged by the
MAGICFX
PSYCO2JET within the output distance.
®
• Do not use the MAGICFX
• Do not connect more units to a single electrical circuit than the installed fuse is able to
handle. (Calculate the summed load with the electrical data from Section 1.2)
• Do not remove any safeguards, safety caps and safety symbols.
• All required safety devices must be in good condition and function properly.
• Ensure sufficient lighting of the surroundings.
• Keep the workplace clean.
2.2
CO
2
The MAGICFX
PSYCO2JET uses liquid CO
®
Make sure that you are well informed on these risks before installation and/or operation. Always
use approved CO
cylinders, hoses and connections. Always consult your CO
2
regulations and instructions on safe installation and use.
MAGIC FX is not liable for unsafe situations, accidents and damage that are the result of incorrect
working with CO
gas and CO
2
Inadequate installation and/or operation of a CO
WARNING
cylinders can lead to death or serious injury. Always follow the instructions from
this manual, from your CO
2.3
INDOOR USE
The MAGICFX
PSYCO2JET is designed for outdoor use and use in well-ventilated indoor spaces.
®
When used indoors, make sure you take the necessary preparations. These preparations could
include, but are not limited to:
• Consulting your CO
• Calculating the reduction of oxygen for the indoor space.
14
MAGICFX® PSYCO2JET — User and Installation Manual
PSYCO2JET if there are people or animals in the direct output.
®
PSYCO2JET without a Controller, Dimmer or DMX Pack.
®
as input. The application of CO
2
cylinders.
2
supplier and from local authorities.
2
supplier.
2
PSYCO2JET.
®
PSYCO2JET.
®
involves serious risks.
2
supplier for
2
powered machine and CO
2
2
Advertisement
Table of Contents
