Setting The Blue Screen Mode; Adjusting The Melody Sound; Setting The Hdmi Black Level; Setting The Film Mode - Samsung TX-T3091WH Owner's Instructions Manual

Setting the Blue Screen Mode

If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to
"Off".
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select Blue Screen, then press the ENTER button.
Press the ▲ or ▼ button to select On or Off, then press the ENTER button.
Press the EXIT button to exit.

Adjusting the Melody Sound

The TV power on/off melody sound can be adjusted.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select Melody, then press the ENTER button.
3 Press the ▲ or ▼ button to select Off, Low, Medium, or High, then press the ENTER
button.
Press the EXIT button to exit.
TRADEMARK & LABEL LICENSE NOTICE
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.

Setting the HDMI Black Level

Use this function when the screen is too dim in the HDMI mode. (by HDMI input for the
RGB limited range of 16 to 235)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select HDMI Black Level, then press the ENTER button.
3 Press the ▲ or ▼ button to select Normal or Low, then press the ENTER button.
Press the EXIT button to exit.
➢
This function is active only when the externel input connects to HDMI(RGB signals).

Setting the Film Mode

Film mode automatically senses and processes film signals from all sources and adjust
the picture for optimum quality.
➢
Film mode is supported in 480i only.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select Film Mode, then press the ENTER button.
3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button.
Press the EXIT button to exit.
English - 23
Setup
Plug & Play
Language : English
Time
V-Chip
Caption
Menu Transparency : Medium
Off
Blue Screen : Off
On
▼ More : On
Move Enter Return
Setup
▲ More
Melody : Medium Off
HDMI Black Level : On Low
Film Mode : Off Medium
Function Help : On High
SW Upgrade
Move Enter Return
Setup
▲ More
Melody : Medium
HDMI Black Level : On
Normal
Film Mode : Off Low
Function Help : On
SW Upgrade
Move Enter Return
Setup
▲ More
Melody : Medium
HDMI Black Level : Normal
Off
Film Mode : Off
On
Function Help : On
SW Upgrade
Move Enter Return