Table of Contents
Advertisement
•
The LCD Display 's configuration at the back may vary slightly depending on the LCD
Display model.
Connecting AV Devices
1.
Connect the Video and [R-AUDIO-L] port of the DVD, VCR or DTV Set-Top Box to the
Video and [R-AUDIO-L] LCD Display.
2.
Play the DVD, VCR or Camcorder with a DVD disc or tape inserted.
3.
Select AV using the SOURCE .
Connecting to a Camcorder
1.
Locate the AV output jacks on the camcorder. They are usually found on the side or back
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the AV/COMPONENT AUDIO IN [R-AUDIO-L] on the LCD Display .
2.
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV
IN [VIDEO] on the LCD Display .
3.
Select AV for the Camcorder connection using the Source button on the front of the LCD
Display or on the remote control.
4.
Then, start the Camcorder with a tape inserted.
Connections
31
Advertisement
Table of Contents
Troubleshooting
