Samsung SIR-S310W Owner's Manual page 99

Chapter 6: Settings, preferences, upgrades, and extras
Setting the Default format (model SIR-S310W only)
You should use this preference setting to tell your DIRECTV Receiver whether your
default audio format is PCM digital audio signals or Dolby Digital audio signal.
To set the Default Format preference, follow these steps:
1
Press the MENU button on your remote control.
The Main menu appears.
2
Use the arrow buttons on your remote control to highlight the Setup menu
item, then press the
The Setup menu appears.
3
Use the arrow buttons on your remote control to highlight the Preferences
menu item, then press the
The Preferences menu appears.
4
Use the arrow buttons on your remote control to highlight the Audio menu
item, then press the
The Audio menu appears.
5
Use the arrow buttons on your
remote control to highlight the
Default Format menu item, then
press the
control. A list appears from which
you can choose Dolby Digital or
PCM for default audio formats.
6
Use the arrow buttons on your remote control to highlight the format
supported by your audio receiver, then press the
on your remote control.
When you select a format the Default Format list disappears.
Your selection is indicated in the Default Format line on the Audio menu.
button on your remote control.
button on your remote control.
button on your remote control.
button on your remote
button
92