Samsung SIR-S310W Owner's Manual page 101

Chapter 6: Settings, preferences, upgrades, and extras
Setting the Digital decoding mode (model SIR-S310W only)
If you connect your DIRECTV receiver with RF cable or A/V cable to your TV set,
the Dolby Digital audio can be decoded by your model SIR-S310W DIRECTV
Receiver. You should use this preference setting to tell your DIRECTV receiver
process Dolby Digital audio decoding through to TV out or Audio out.
To set the Digital Decording Mode preference, follow these steps:
1
Press the MENU button on your remote control.
The Main menu appears.
2
Use the arrow buttons on your remote control to highlight the Setup menu
item, then press the
The Setup menu appears.
3
Use the arrow buttons on your remote control to highlight the Preferences
menu item, then press the
The Preferences menu appears.
4
Use the arrow buttons on your remote control to highlight the Audio menu
item, then press the
The Audio menu appears.
5
Use the arrow buttons on your
remote control to highlight the
Digital Decoding Mode menu item,
then press the
remote control. A list appears from
which you can choose TV Out or
Audio Out.
6
Use the arrow buttons on your
remote control to highlight the
Digital Decoding Mode menu item, press the
control.
When your TV is connected through TV OUT, choose TV Out. When your TV
is connected through AUDIO OUT, choose Auido Out.
When you select a decoding mode the Digital Decoding Mode list disappears.
Your selection is indicated in the Digital Decoding Mode line on the Audio
menu.
button on your remote control.
button on your remote control.
button on your remote control.
button on your
button on your remote
94