U-Prox HW Installation Manual

U-PROX HW Installation manual
Features

Power:
o
External power supply, 12V:
o
Micro USB B standard power supply

Direct operation with U-Prox IP500 panels
o
ISM band (
o
Guaranteed range of 20 m
o
U-Prox IC L connection interface – wireless computer network Wi-Fi

One micro USB B port for network settings configuring and firmware upgrade

Communication interface IEEE 802.11b/g/n (Open, WPA-PSK, WPA2-PSK)

Adjusted with U-Prox IP software. Supports automatic configuration for one-range network.

Overall dimensions of device enclosure – 120 х 40 х 355 mm

Temperature range: 0 - +55

Maximum relative humidity 80% without condensation
Repeater
The look of the repeater is shown in Fig. 1
1
Location of connectors on repeater board and their function is shown in Fig. 2

Current consumption max 150 mA @ 12V

Maximum voltage ripple 500 ma peak to peak
915.5-927.5 MHz ) device with bi-directional communication
0
C at 80.% relative humidity.
Fig. 1. U-Prox HW repeater
Figure 2. U-Prox HW board
1. The Enclosure
3
2. Panel board
3. Connectors
2