Omega BL300 Series User Manual page 15

TROUBLESHOOTING
BLENDER FAILS TO START.
SOLUTION:
1. Place container properly on the base
2. Check to ensure controls are clean and moving freely.
3. Double-check to ensure power cord is securely plugged into the electric outlet.
4. Check to see if the circuit breaker has tripped or if the fuse for the electric outlet has
blown.
BLENDER STOPPED
SOLUTION:
1. Unplug blender and wait 5 minutes.
2. Plug the blender back in and resume operation.
INGREDIENTS DO NOT MIX PROPERLY
SOLUTION:
1. Container is too full.
2. Cutter unit blades are not sharp enough or are damaged.
3. Solid pieces are bigger than 1" (25 mm) cubes.
4. Check the speed to create a fluid blend.
5. Check to see if enough liquid has been added to the ingredients. Mixture should be
fluid and free-running at all times.-
13