Samsung PS-42V4S Owner's Instructions Manual page 13

Connecting Speakers
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching
the "+" and "-" ends of the cable with the diagram on the PDP.
➢
◆ The speakers MUST have to a power handling capability of 10 watts minimum (impedance 8Ω).
◆ When you connect the speaker wire to the external speaker out connector, first bind the speaker wire
round the ferrite core to secure it.
➢
Before connecting the speaker wire to the PDP, turn off your PDP.
Ferrite Cores
The ferrite cores are used to attenuate undesired signals.
When connecting cables, attach one of these ferrite cores to
the cable near the connector.
(continued)
13
ENG