Audio Source Selection; Volume Setting; Audio Playback In Aux/Bluetooth Mode - Medion LIFE E64058 User Manual

12. Audio source selection

Select the required audio source (AUX, BT, HDMI ARC or Optical) by pressing
the SOURCE button on the sound bar or the OPTICAL, AUX, BT or HDMI ARC
buttons on the remote control.
The operating mode selected in any given case is displayed by the coloured
6
LED indicators
Power light
Red
Green
Orange
Blue

13. Volume setting

Use the VOL+/VOL- buttons on the sound bar or on the remote control to ad-
just the volume to the required level:
+
–
The volume can be turned off completely by pressing the MUTE button on
the remote control.
Press the MUTE button again to restore the audio output.

14. Audio playback in AUX/Bluetooth mode

If you have connected the sound bar to a device which supports the A2DP
profile and AVRCP profile (Audio/Video Remote Control), the sound bar will
be used as an output medium and the audio signals will be emitted by the
sound bar only.
NOTE
If you have connected the sound bar to a Bluetooth-enabled
mobile telephone, the music playback will be interrupted if a call
comes in and resumed after the call has ended.
100 of 104
:
Flashing
HDMI
Permanently on
Standby
AUX
Optical
Bluetooth
Increase volume
Reduce volume