Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Cloner Alliance HDML-Cloner Box Pro
Summary of Contents for Cloner Alliance HDML-Cloner Box Pro
- Page 4 System Requirements Install HDML-Cloner Pro Helper Connect Register HDML-Cloner Pro Helper How to get the registration code of HDML-Cloner Pro Helper...
- Page 11 * The USB flash drive is not included in the product box. You need to purchase it separately.
- Page 12 Tips on selecting a proper USB flash drive: 1. Recommended brands: Toshiba, SanDisk, Kingston 2. Interface specifications: USB 2.0, USB 3.0 3. Connector type: Type A 4. Make sure the actual reading speed is not less than 30Mbps, and the writing speed is not less than 10Mbps.
- Page 13 If you set the recording frequency to "Every day", please make sure to create a schedule task at least 1 minute in advance. Then HDML-Cloner Box Pro will start recording the video at the scheduled time properly.
-
Page 26: System Requirements
Windows OS working together with HDML-Cloner Box Pro. Please download the latest version of HDML-Cloner Pro Helper from our official website: https://www.cloner-alliance.com/download.html Note: Please don't connect HDML-Cloner Box Pro to PC before installing the software, or there will be a prompt "Unknown USB Device". - Page 27 If the following window appears during the installation process, please select "Install", otherwise HDML-Cloner Pro Helper will not work properly.
- Page 28 Connect...
- Page 31 Register HDML-Cloner Pro Helper Please register HDML-Cloner Pro Helper first before using. With the trial version, you can only use it for 7 days. Run HDML-Cloner Pro Helper. Click in the main interface and then click the "Register" button. Click the "Input registration code" button to open the "Register" window. Fill in your proper Email address, name and registration code.
- Page 32 How to get the registration code of HDML-Cloner Pro Helper? There are two methods to obtain the registration code of HDML-Cloner Pro Helper. 1. Scan the QR code below to get the code if the S/N of HDML-Cloner Box Pro is in the form of CPXXXXXXXX.
- Page 33 For more details about recording videos to PC, please scan the QR code below to visit the Frequently Asked Questions. cloner-alliance.com/hdmicloner-box-pro-faq/technical-faq/how-to-record-videos-to-pc-with-hdml-cloner-box-pro.html...
- Page 34 Setup Video Resolution: Set the output video resolution as 1080p/720p/480p. Video Bitrate: If you set it to a large value, you will get higher image quality, but with larger file size. If you set it to a small value, you will get lower image quality, but with smaller file size. 6Mbps, 8Mbps, 10Mbps, 12Mbps, 15Mbps and 18Mbps are available.
- Page 35 Hotkey for Recording: Set the hotkey for starting and stopping recording videos. You can choose from F1 to F11. MP4 Format: Four options are available, which are MP4 format (video codec: H.264, audio codec: AAC), MP4 format (video codec: H.264, audio codec: AC3), MP4 format (video codec: H.264, audio codec: MP3) and MPEG-TS format (video codec: H.264, audio codec: AAC).
- Page 36 Capture picture format: Select the captured picture format. BMP, PNG and JPG are available. GIF Capture: Set the width, height and frame rate for the captured GIF picture.
- Page 37 Enable Video Broadcast Share: Select this option and the function of Video Broadcast Share will be enabled. OK: Click to save the settings. Cancel: Click to exit the "Setup" window without saving the settings. Note: The parameter options may change as the software upgrades. Please refer to the "Setup" window of the latest version of the software.
- Page 38 2. What kinds of mobile hard disks do ClonerAlliance products support? 2TB capacity or below. Less than 500mA current (Under dependent power sources). 10MB/s read-write speed or above (You can use CrystalDiskMark to test speed.). FAT32 or NTFS file system on Windows 7 operating system or above. Make sure your mobile hard disk is in the MBR partition style.
- Page 39 4. Why is there a prompt "Can't Detect USB Device"? Please format your USB stick or unplug the USB stick from the USB port and plug it into HDML-Cloner Box Pro again. If the solutions don't work, please send an email to support@cloner-alliance.com for direct help.
- Page 44 https://www.cloner-alliance.com...
Need help?
Do you have a question about the HDML-Cloner Box Pro and is the answer not in the manual?
Questions and answers