Table of Contents
Advertisement
Rear panel:
3
1
2
5
4
1. Power supply: The Epsilon II has an external power supply which must be
connected to the 5 pin XLR found at the rear.
2. Main outputs/ master insert: This DB25 connector is split into the
following sections:
1-2: Main out
3-4: Monitor out. It has the same signal as the main out but you can use it for
other applications.
5-6: Master insert send.
7-8: Master insert return.
3. Passive (insert): This DB25 connector is split into the following sections:
1-2: Passive send.
3-4: Passive return.
4. Insert 1-8: Return 1-8 channels and Send 1-8 channels.
5. Inpust 1-24: 3 DB25 connectors that received the 24 channels.
Note: All the DB25 connectors use the Tascam® format with the following
configuration:
6
Advertisement
Table of Contents
